During the process of gluing, the following should be paid attention to:
1.1 PVC wood grain film must be back-coated, otherwise it will not be easy to glue, not paste well in the process of laminating.
1.2 Usually make one side of PVC wood grain film adhesive with roller coating or blade coating.
1.3 Glue coating must be homogeneous and same thickness to ensure no glue missing and no glue accumulate on the board. The thickness of glue coating should be adjusted according to the thickness of film and weather.
1.4 Time after glue before coating, summer or autumn season with hot and dry condition, time can be shorter, while and cold and humid winter and spring, time can be longer. The best gluing timing is when touching the surface of the glue with fingers, feeling it is almost dry but sticky, and then keeping it on the exact position, sticking the both sheets with flatbed pressing.
How long the time needed to do the gluing is determined by the thickness of the coating, the speed of doing the coating and the temperature of the environment.